-
400mm uhp graphite electrode
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm2. -
UHP Graphite Electrode Full Size
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm2. -
low consumption rate UHP graphite electrode 500mm 550mm 600mm
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm2. -
PriceList for Rp Hp 400 450 500mm Graphite Electrodes - HP GRAPHITE ELECTRODES – the Diameters Range From 200 mm to 600 mm – Aohui
DESCRIPTION HP graphite electrode is the conducting element for electric arc furnaces steelmaking. It is made of petroleum coke, needle coke, coal pitch and produced by a series of strict production processes. High-current lines insert through the graphite electrode port inside the furnace body. This will releases electric energy in the arc furnace to heat the furnace. The demand for the larger diameter electrodes has been increasing as EAF furnace sizes become larger. Graphite electrode... -
Top Suppliers Graphite Crystallizer For Continuous Casting Melting Brass - GRAPHITE ELECTRODE NIPPLES – Match With UHP/HP/RP Graphite Electrodes – Aohui
DESCRIPTION Graphite electrodes nipples are used to connect two or more electrodes into column. And the purpose of that is to realize continuous use of electrodes in electric arc furnace steelmaking process. Nipples, with conventional external threads surface, are the important clamping device to extend the electrode length. Doing this avoids the unproductive consumption in smelting. As a technical manufacturer, we know that the mismatch between the graphite electrode body and the nipple... -
Uhp 600mm Graphite Electrodes
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm2. -
rp/hp/uhp graphite electrodes with nipples
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm2. -
stainless steel melting furnace graphite electrode
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm2. -
Factory Promotional China High Power Graphite Electrode with Good Conductivity and Low Resistivity HP650
UHP graphite electrode is mainly used for ultra high power electric arc furnaces with the current density greater than 25 A/cm2. -
Lowest Price for China Best Price 16 Inches Graphite Electrode with Low Resistance
Carbon Anode Scrap is also called carbon anode block,anode scrap,anode remnants.It is by-product of aluminum plants,mainly used as smelting fuel replacing foundry coke in copper smelting industry,because of its more energy and lower price than foundry coke. -
Manufacturer for Gpc/Graphitized Petroleum Coke For Foundry - Calcined Petroleum Coke – Aohui
Feature High specific resistance and reactivity. Semicoke can increase the daily output by 0.221-0.311t/(d•furnace) while power saving by 537-649kW•h when using with metallurgical coke in the ferrosilicon industry. Suitable particle size. Blacking can be used directly as granular injection material and limited investment on grinding, drying and operation systems. Low sulfur content and SO2 emission. The activated carbon made from semicoke is with rich pores and strong adsorption capacity... -
Professional China China UHP Graphite Electrode for Hot
HP graphite electrode is mainly used for high power electric arc furnaces with the current density range of 18–25 A/cm2.
