China 2019 China New Design Carbon Graphite Rod - UHP GRAPHITE ELECTRODE – Low Electrical Resistance, High Density – Aohui Manufacturer and Factory

2019 China New Design Carbon Graphite Rod - UHP GRAPHITE ELECTRODE – Low Electrical Resistance, High Density – Aohui

Short Description:

Product Detail

FAQ

Product Tags

Feedback (2)

We constantly believe that one's character decides products' high quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for Graphite electrodes to melt scrap metal , Uhp Grade Graphite Electrode , High quality 100-700mm diameter graphite electrodes , Please don't hesitate to contact us if you are interested in our products. We firmly believe our products will make you satisfied.

2019 China New Design Carbon Graphite Rod - UHP GRAPHITE ELECTRODE – Low Electrical Resistance, High Density – Aohui Detail:

DESCRIPTION

UHP graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar. Graphite electrodes are finished with a cylinder shape and machined with threaded areas at each end. In this way, the graphite electrodes can be assembled into an electrode column using electrode nipple.

In order to meet the requirement of higher work efficiency and lower total cost, large capacity ultra-high power arc furnaces are becoming more and more popular. Because of this, UHP graphite electrodes with diameters of over 500 mm will dominate market.

FEATURE

Withstand large currents, high discharge rate.
Good dimension stability, not easy to deform.
Resistant to cracking & spalling.
High resistance to oxidation and thermal shock.
High mechanical strength, low electrical resistance.
High machining accuracy, good surface finishing.

APPLICATION

Graphite electrodes are widely used for production of alloy steels, metal and other nonmetallic materials, etc.
DC electric arc furnace.
AC electric arc furnace.
Submerged arc furnace.
Ladle furnace.

SPECIFICATION

Table 1: Technical Specification of UHP Graphite Electrode

Dia.	Resistance	Density	Flexure Strength	Elastic Modulus	Ash Content	CTE	Current Load	Current Density
(inch)	(≤, µΩ·m)	(≥, g/cm3)	(≥, MPa)	(≤, GPa)	(≤, %)	(100 °C – 600 °C)	(A)	(A/cm2)
						(≤, 10-6/°C)
10	5.5	1.67	11	14	0.3	1.5	8100–12200	20–30
12	5.5	1.67	11	14	0.3	1.5	15000–22000	20–30
14	5.5	1.67	11	14	0.3	1.5	20000–30000	20–30
16	5.5	1.67	11	14	0.3	1.5	25000–40000	19–30
18	5.5	1.66	11	14	0.3	1.5	32000–45000	19–27
20	5.5	1.66	11	14	0.3	1.4	38000–55000	18–27
22	5.5	1.66	11	14	0.3	1.4	42000–66000	17–26
24	5.5	1.66	11	14	0.3	1.4	49000–76000	17–26

Table 2: Graphite Electrode Size & Tolerance

Diameter (mm)					Length (mm)
Nominal Diameter		Actual Diameter			Nominal Length	Tolerance	Short Length
(inch)	(mm)	(max.)	(min.)	(rough spot)	Nominal Length	Tolerance	Short Length
10	250	256	251	248	1600/1800	±100	-275
12	300	307	302	299	1600/1800
14	350	357	352	349	1600/1800
16	400	409	403	400	1600/1800/2000/2200
18	450	460	454	451	1600/1800/2000/2200
20	500	511	505	502	1800/2000/2200/2400
22	550	562	556	553	1800/2000/2200/2400
24	600	613	607	604	2000/2200/2400

SURFACE QUALITY

There should be less than two defects or holes on the electrode surface, the maximum size of which is mentioned in the below chart.
There should be no transverse crack on the electrode surface. For the longitudinal crack, the length should be less than 5% of the electrode circumference and the width should be 0.3 to 1.0 mm.
The width of black area on electrode surface should be less than 1/10 of the electrode circumference and the length should be less than 1/3 of the electrode.

SpecificationDefect Dimension	Nominal Diameter of Graphite Electrode (mm)
SpecificationDefect Dimension	300–400	450–600
Diameter (mm)	20–40	30–50
Diameter (mm)	(< 20 mm should be negligible)	(< 30 mm should be negligible)
Depth (mm)	5–10	10–15
Depth (mm)	(< 5 mm should be negligible)	(< 10 mm should be negligible)

Product detail pictures:

Related Product Guide:

abide by the contract", conforms on the market requirement, joins within the market competition by its superior quality likewise as provides far more comprehensive and great company for shoppers to let them develop into huge winner. The pursue on the corporation, is definitely the clients' gratification for 2019 China New Design Carbon Graphite Rod - UHP GRAPHITE ELECTRODE – Low Electrical Resistance, High Density – Aohui , The product will supply to all over the world, such as: Chicago, Guinea, Hongkong, High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. We also offer agency service---that act as the agent in china for our customers. If you are interested in any of our products or have an OEM order to fulfill, please feel free to contact us now. Working with us will save you money and time.

Q1: Is your company AO HUI a manufacturer or trader?
A1: Manufacturer, some time we help our clients to purchase relevant products as a trader.
Q2: What’s the MOQ?
A2. No limitation.
Q3: Can we visit your factory?
A3: Of course ,welcome at any time,seeing is believing
Q4: What’s your payment terms?
A4: Negotiation
Q5: Is your company accept customization?
A5: Professional technology teams and engineers all can satisfy you.
Q6: How do you guarantee quality?
A6: For every production processing,we have complete QC system for the chemical composition and Physical properties.After production,all the goods will be tested ,and the quality certificate will be shipped along with goods.
Q7: What’s the proportion of abroad business?
A7: Abroad market around 50%; Domestic market around 50%; and now export proportion is increasing.
Q8: Your company would provide samples?
A8: Yes, we could supply samples for free, and the freight will be undertaken by clients.